Indiana’s rich Native American history lies scattered across our fields, creek beds, and river banks in the form of stone artifacts. Our state’s geological past and indigenous heritage have left us with countless locations to discover arrowheads and points.

The best hunting spots are often where ancient peoples would have gathered, hunted, or lived. Natural water sources were essential to prehistoric life, making stream banks and lakeshores prime locations for finding these treasures.

Many Hoosier farmers routinely discover points while plowing their fields, especially after spring rains wash away topsoil. These artifacts sometimes surface in areas where glaciers deposited gravel during the last ice age.

Understanding these patterns can help narrow down the most promising search locations.

The Arrowhead and Point Shapes You Can Find

There are several different shapes that were commonly used that you need to keep an eye out for:

Notched

Notched projectile points include side notch, corner notch, and basal notch types. The notches are flaked indentations shaped like a U, V, or semi-circle, made to attach the point securely to a handle or shaft.

The different notching styles were created to suit specific uses and ways of attaching the points.

Side Notch

Side notched arrowheads have small notches carved into the sides near the base of the point. These notches make it easier to attach the arrowhead to a shaft using sinew or cord.

They are widely used because they are durable, easy to make, and allow for a secure fit. The notches are placed on the sides, giving the arrowhead a broad base for hafting.

This design makes them stronger and more stable compared to other types, like corner-notched or basal-notched points.

Corner Notch

Corner notch projectile points have notches that start where the blade meets the base. These notches form barbs that help them attach more securely and work better.

The notch placement is what makes corner notch points different from side notch points. Material is removed from the corners of the base to create a strong and reliable design.

This type of point is simple but works well for attaching to a shaft. The corner notches keep the point stable and firmly in place.

Basal Notch

Basal notch projectile points have notches that start at the base of the point. These notches are shaped to create long barbs that help attach the point to a shaft.

The design removes material from the base to form the notches. This makes the point strong and secure when attached.

This type of point works well because it’s simple and effective. The long barbs give extra support to keep the point firmly in place.

Stemmed

Stemmed projectile points have a sharp tip on one end and a stem on the other for attaching to a shaft. The stems can be contracting, straight, or expanding, depending on their shape.

These points are made from long flakes or blades that are shaped and refined to give them their final form.

Contracting Stem

The stems of contracting stem projectile points gradually narrow from the shoulders toward the end. The taper can range from a small narrowing to a sharp, clear taper.

The tapered stem allows the point to fit securely onto the shaft. This shape keeps the point stable and ready to use.

These points are made to work well while staying simple in design. The tapering stem makes them dependable for different uses.

Straight Stem

Straight stem projectile points have stems with sides that run straight and parallel from the shoulders to the base. This design gives the stem the same shape along its length.

The straight, even sides make it easy to attach the point firmly to a shaft. This shape helps keep the point stable and strong when in use.

These points are simple but work well, with a stem shape made for practical attachment. Their strong design makes them good for many different tasks.

Expanding Stem

Expanding stem projectile points have stems that broaden as they extend downward. This gives them a shape that becomes broader as it goes down.

The wider stem design helps these points fit securely onto a shaft. In some cases, the shape can look similar to side-notched points.

These points are simple and work well, with a stem shape built for stability. The broader base keeps them firmly attached and dependable.

Lanceolate

Lanceolate projectile points are shaped like a lance, with tips that narrow to a sharp point. These points usually don’t have noticeable notches or stems, which makes them different.

The word “lanceolate” describes their long shape that gets thinner at both ends.

Auriculate Points

Auriculate points are projectile points with “ears” or projections that point downward. These ears, called auricles, give the point its special shape.

The downward-pointing auricles help the point attach securely to a shaft. This design is both practical and easy to recognize.

These points are often grouped with lanceolate points because they have similar shapes. The angled auricles make them different and define their type.

Leaf Points

Leaf points, also called ovate or egg-shaped points, are projectile points with a round base. They widen from the tip and then narrow back toward the base, giving them their shape.

The round base makes the design balanced and even. This shape lets the point taper smoothly, making it useful for many tasks.

These points are named because they look like a leaf with a wide middle and narrow ends. The rounded base makes them different from other kinds of projectile points.

Triangle Points

Triangle points are projectile points with blades that spread out from the base to create a triangular shape. They can be equilateral, where all sides are the same length, or isosceles, where two sides are longer.

The triangular shape provides a wide cutting edge while keeping the tip sharp. This design makes the points useful and easy to work with.

These points are simple to recognize because of their geometric shape. The differences between equilateral and isosceles types give this group some variety.

Bifurcated

Bifurcated projectile points have a deep notch in the center of the base, giving them a forked or split look. This unique shape makes them different from other types like stemmed or notched points.

The deep notch often creates a shape that looks like “ears” dividing into two branches. Flaking around the base and center helps give these points their distinct appearance.

Some bifurcated points are ground or smoothed to make their shape more refined. Many of them have shoulders like stemmed points, but some do not have clearly defined shoulders.

The Types of Stone Commonly Used

When you’re out searching it’s important to know what colors and textures you should be looking for. These are the most common to keep an eye out for:

Flint (Chert)

Flint is a hard, fine-grained rock that often comes in colors like gray, black, brown, or tan. It has a smooth surface and sometimes a glossy appearance when freshly broken. Inside, it has a glassy or waxy texture, which makes it perfect for shaping into sharp tools.

Flint was used because it is very hard but can also be chipped or flaked into sharp edges. Flint was also durable and could hold a sharp edge for a long time, making it ideal for hunting and cutting.

Obsidian

Obsidian is a type of volcanic glass that forms when lava cools very quickly without forming crystals. Its sharp edges made it perfect for making tools like arrowheads and cutting blades in the past.

This material is hard and brittle, breaking in a smooth and predictable way. These qualities let people shape it into sharp and strong projectile points using a method called knapping.

Indigenous groups traded obsidian because of its unique features and usefulness.

Jasper

Jasper is a hard, opaque rock made mostly of quartz and chalcedony. Its colors, like red, yellow, brown, and green, come from the minerals it contains, with red often caused by iron.

This rock breaks smoothly, making it great for making sharp tools and projectile points. Its strength and smooth break made it useful for cutting, carving, and engraving.

People have used jasper for thousands of years, and it has been found in very old archaeological sites. It was shaped into tools and decorative items because it was both strong and versatile.

Quartzite

Quartzite is a tough rock formed when sandstone is heated and pressed together. It is mostly made of quartz and has a rough surface with a shiny look.

This rock breaks in a way that makes sharp edges, which is why it was used to make stone tools and arrowheads. People in the past often shaped quartzite into tools for cutting and grinding because it is so strong.

Quartzite can be white, gray, pink, or red, depending on the minerals inside it. Its durability and availability made it useful for making tools and for building.

Basalt

Basalt is a dark rock with fine grains that forms when lava cools quickly on the surface. Its hardness and strength were well-suited for crafting tools and weapons in the past.

This rock has a lot of magnesium and iron, which gives it the toughness needed for pounding and cutting tools like hammers and axes. Its durability also made it a good choice for sharp projectile points.

Basalt is tough enough to handle wear and tear, so it was shaped into reliable tools. Because it was easy to find, it became a popular material for early toolmakers.

The Types Of Arrowheads And Points You Can Find In The US

There are quite a few different types of arrowheads and other projectile points ready to be discovered. Keep an eye out for:

Clovis Points

Clovis points are some of the most iconic and widely recognized types of projectile points in North America. These stone tools, primarily used as tips for spears, are associated with early human populations in the Americas.

What makes Clovis points particularly unique is their distinct shape and craftsmanship. They are often considered the hallmark of the Clovis culture, which is thought to have been one of the first groups to inhabit the Americas.

What they look like

Clovis points are characterized by their large, leaf-shaped design with sharp edges and a prominent fluted base. They are typically made from high-quality materials like flint, chert, or obsidian, which allowed for the creation of extremely sharp edges.

The fluted base was likely a practical feature that allowed these points to be securely attached to a spear or dart shaft. The size of the points can vary, but they are generally between 2 and 4 inches in length.

The fluting, or groove, on the base sets them apart from other types of points found across North America and is one of the most recognizable features.

Time period

Clovis points were used around 13,000 years ago, during the late Pleistocene epoch, and are associated with the earliest human populations in the Americas.

Folsom Points

Folsom points are projectile points connected to the Folsom tradition in North America. They were first found in 1908 at the Folsom site in New Mexico, alongside the bones of an extinct bison, Bison antiquus.

This find showed that humans had lived in the Americas far earlier than was previously thought. The unique design of Folsom points was officially recognized in 1928 after another discovery confirmed their distinctive features.

What They Look Like

Folsom points are carefully worked on both sides and shaped like a symmetrical leaf with a concave base. They have wide, shallow grooves, called flutes, running nearly the full length, which may have helped attach them to wooden shafts.

Their edges are finely crafted, showing skilled workmanship. Some were also used as knives, in addition to being projectile points.

Making the flutes required advanced techniques, and archaeologists spent years figuring out how they were made. The fluting process started at the base using a nipple platform, and traces of this platform can still be seen on some points.

Time Period

Folsom points were used between 11,000 BCE and 10,000 BCE, during a period when people hunted large animals like bison. Their discovery changed earlier ideas about when humans first lived in North America.

Dalton Points

Dalton Points come from the Late Paleo-Indian and Early Archaic periods and were mainly found in southeastern North America. These tools were highly adaptable, serving as knives, saws, chisels, and scrapers as they were reshaped through frequent sharpening.

Their design combined practicality and flexibility, changing to fit different uses over time. Variants like the Hardaway Point and Meserve Point share features with Dalton Points but reflect regional or functional differences.

What They Look Like

Dalton Points are medium to large with a concave base and flared “ears.” The blade often has a narrowed waist that gives it a unique shape and is commonly serrated without beveling.

The cross-section of these points ranges from elliptical to flat. The hafting area is usually ground, and basal flaking can sometimes look like fluting.

Flaking patterns include oblique transverse, horizontal transverse, collateral, or random styles. Each technique shows the precision and effort required to craft these tools.

Time Period

Dalton Points were used between 10,700 BCE and 8,400 BCE, during a shift from Paleo to Archaic tool traditions.

Kirk Points

Kirk Points are arrowheads from the Early Archaic period, found mainly along the Eastern Seaboard, Gulf Coast, and in river valleys of the United States. They were adaptable tools with different styles, including the Kirk Corner Notched and Kirk Stemmed types.

These points were often reshaped for new purposes, making them useful in many ways. The Kirk design likely influenced other point types as tool-making methods evolved.

What They Look Like

Kirk Corner Notched Points are medium to large, with a triangular shape and a cross-section that ranges from flat to slightly rounded. They have strongly barbed shoulders and expanding stems, with bases that can be straight or concave.

The blades are often serrated, with the depth of serrations varying between points. These points have a random flaking pattern, and basal grinding is not commonly seen.

Kirk Stemmed Points feature straight or slightly expanding stems and blades that are usually straight or slightly curved. Serrations are less frequent, and the shoulders are slightly barbed or horizontal.

Time Period

Kirk Points date back to 9,500 to 8,500 years ago, during the Early Archaic period and the early Holocene.

Savannah River Points

Savannah River Points are arrowheads from the Late Archaic period, mainly found in the southeastern United States. They are large, triangular tools with square stems, made with percussion flaking and finished with pressure flaking.

These points are relatively thin for their size, measuring between 44 and 170 mm long and 35 to 70 mm wide. Variants like the Small Savannah River and Cattle Run types reflect differences in region and time.

What They Look Like

Savannah River Points have broad, triangular blades with edges that are either straight or slightly curved. The lower half of the blade often has parallel sides that curve toward the tip.

The stem is square with sides that are straight or slightly expanding, and the base is typically concave. Basal thinning is common, but basal grinding is rare on these points.

The cross-section is either flat or slightly rounded, and the flaking pattern is random. These points are relatively thin, with a thickness-to-width ratio of about 1:10.

Time Period

Savannah River Points date back to roughly 4,150 to 3,800 years ago, during the Late Archaic period.

Adena Points

Adena Points are medium to large arrowheads tied to the Adena culture, which was centered along the Ohio River. These tools were often made from chert and crafted with flaking techniques that ensured durability and sharp edges.

Found across the Ohio Valley and other parts of eastern North America, they are most common in Ohio, Kentucky, Indiana, and West Virginia. Their design came from earlier Archaic tools and was used for cutting, piercing, and other tasks.

What They Look Like

Adena Points have broad, triangular or oval-shaped blades with edges that curve outward. Repeated sharpening often made the blades straighter over time.

The stems are medium to long and can be square or rounded, earning the nickname “beaver tail.” Bases may sometimes be ground, and the cross-section is typically biconvex, providing a balanced shape.

These points range from 34 to 150 mm in length, with an average size of 70 mm. They are relatively thin, with widths averaging 28 mm and thicknesses between 7 and 17 mm.

Time Period

Adena Points date from 800 BCE to 200 CE, during the Early Woodland period when the Adena culture flourished.

Woodland Triangular Points

Woodland Triangular Points are arrowheads from the Woodland Period in North America, used between 1100 BCE and 1650 CE. They were made from materials like quartzite, quartz, rhyolite, chert, and jasper, using resources available locally.

These points were practical tools for hunting and other tasks and have been found in various locations. Their design changed over time to adapt to technological and societal developments.

What They Look Like

Woodland Triangular Points have a simple triangular shape with defined edges and a symmetrical appearance. The choice of durable materials added to their reliability.

The edges are generally straight, and the design is both functional and efficient. Careful flaking was often used to improve their shape and performance.

The size and thickness of these points vary based on their intended use and material. Their straightforward design made them adaptable and effective for different purposes.

Time Period

Woodland Triangular Points were used during the Woodland Period, from approximately 1100 BCE to 1650 CE.

Mississippian Points (Madison Points)

Madison Points are small triangular arrowheads used during the Late Woodland to Mississippian period. They were first identified in Madison County, Illinois, and are found throughout the eastern United States.

Made using pressure flaking, Madison Points are thin and sharp, designed for efficient use. They replaced Levanna Points and marked a change in arrowhead design during this era.

What They Look Like

Madison Points are small, typically ranging from 12 mm to 72 mm in length, with most around 26 mm. Their shape is either isosceles or equilateral triangles, with blade edges that are usually straight but can also curve outward or inward.

The base is straight or slightly concave, with basal thinning to help attach the point to shafts. Serration is rare, and the quality of craftsmanship varies from highly refined to more basic designs.

The cross-section of these points is flat, and the flaking pattern is random. Their small size and simple design made them reliable tools for hunting.

Time Period

Madison Points were used from about 1100 BP to 300 BP, during the shift from the Late Woodland to the Mississippian period.

Pine Tree Points

Pine Tree Points are medium to large arrowheads from the Early and Middle Archaic periods. They were named after the Pine Tree site in Limestone County, Alabama, and are found across the southeastern United States and parts of the Ohio Valley.

These points were built for practical use, with serrated edges and a central ridge that improved sharpness and balance. They may have evolved from the Greenbrier type and were sometimes reclassified when reshaped into narrower forms.

What They Look Like

Pine Tree Points have triangular blades with side notches and serrated edges. A ridge down the center, created by parallel or chevron flaking, gives the blade structure and balance.

The stems are short with incurving sides and a base that can be straight, concave, or convex. Basal grinding is common, making them easier to secure to shafts.

These points typically measure 50 mm to 66 mm long, 25 mm to 29 mm wide, and 5 mm to 9 mm thick. Their size and shape make them both durable and effective.

Time Period

Pine Tree Points were used between 8,000 BP and 5,000 BP during the Early and Middle Archaic periods.

Guilford Points

Guilford Points are medium to large arrowheads from the Middle Archaic period. They are named for their connection to the Guilford area in North Carolina and are often found in the Piedmont region and nearby locations.

These points feature long, narrow blades and well-shaped bases. They were designed for both strength and practicality, with flaking techniques that reflect skilled craftsmanship.

What They Look Like

Guilford Points have long, narrow blades with smooth or slightly curved edges. Their thickness and symmetrical shape make them easy to identify.

The base is typically concave or rounded, with straight bases appearing less frequently. Ground basal edges help with secure hafting.

Lengths range from 50 to 120 mm, with an average of about 90 mm. Widths are usually between 20 and 35 mm, and thickness varies from 5 to 12 mm.

Time Period

Guilford Points were made and used between 6,200 BP and 5,000 BP, near the end of the Middle Archaic period.

Formation To Look Out For If You Want The Best Results

When you’re out looking in the specific locations further down in the article pay special attention to these types of areas and formations:

Creeks, especially where two meet

Creeks are great places to look for arrowheads, especially where two streams come together. These spots were often used as crossings or gathering areas, making it more likely to find artifacts.

Check gravel bars and shallow edges where the water slows, as arrowheads can get trapped there. Silt and debris might hide them, so it’s important to inspect carefully and gently.

Pay attention to sediment layers at the junction of creeks, where erosion can uncover hidden arrowheads. Watch for sharp edges or symmetrical shapes that stand out from the surrounding rocks, as these could be signs of an artifact.

Riverbeds

Riverbeds can contain arrowheads that were moved and dropped by flowing water. Look in places where the current slows, like bends, gravel bars, and shallow pools, as these often collect heavier objects.

Check exposed gravel and rocks carefully for sharp edges or symmetrical shapes that don’t match natural stones. The edges of the riverbed and sandbanks are good spots to search, especially after rain, when water can uncover hidden items.

Watch for materials that look different from the usual stones in the riverbed. Erosion and water movement may group arrowheads with similar-sized rocks or reveal them in visible layers.

Logging clear cuts

Logging clear cuts can uncover arrowheads by disturbing the soil and exposing hidden ground. Search along ridges and slopes, where water runoff might have moved artifacts to easier-to-reach spots.

Flat areas in the clear cut are good places to check, as they were often used for human activity. Look closely at soil piles left by logging equipment, as these can bring buried arrowheads to the surface.

The edges of logging roads and skid trails are worth searching, as they often cut through topsoil that could hold artifacts. Areas with compact or clay-heavy soil are better for preserving arrowheads than sandy or loose ground.

Plowed fields

Plowed fields are great places to look for arrowheads, especially after rain. The water clears away loose dirt, making artifacts easier to spot on the surface.

Check areas where the soil looks darker or richer, as these might have been used for human activity. Look closely along furrows, as plowing often brings buried artifacts to the surface.

Focus on higher spots or small hills in the field, which were common choices for campsites or settlements. Watch for sharp edges or symmetrical shapes in the soil that stand out from the surrounding dirt.

Construction sites

Construction sites can uncover layers of soil that have been undisturbed for years, making them good places to search for arrowheads. Freshly dug or graded areas are especially worth checking for artifacts.

Check piles of removed dirt, as they often bring buried objects to the surface. Look at the edges of trenches and ditches, where erosion might reveal arrowheads in the soil.

Search near water sources or elevated spots within the site, as these were common choices for early campsites. Watch for sharp edges or symmetrical shapes that stand out from the surrounding dirt and debris.

Mountain washouts

Mountain washouts can carry debris, including arrowheads, along natural drainage paths. Check areas where the water slows, as heavier objects like arrowheads often settle there.

Look at gravel bars and rock clusters in the washout, as they can trap artifacts. Freshly exposed soil and sediment after heavy rain are good spots to search for buried arrowheads.

Focus on bends and natural barriers in the washout, where water flow creates small eddies. Watch for shapes and edges that stand out from the surrounding stones, as these may indicate worked tools.

Mesas and bluffs

Mesas and bluffs are good places to look for arrowheads because of their flat and elevated land. Check the edges and overlooks, as these were often used as lookout points.

Search the base of the bluff where erosion can uncover buried artifacts. Rock outcroppings or natural shelves may also hold arrowheads and other tools.

Look for spots where trails or paths might have crossed the mesa. Small depressions or clearings are great places to check for signs of past activity.

Specific locations in the state to look

Now that you have a few ideas on more general locations here are 5 specific recommendations to start with. After these we will have a larger list organized by region of the state:

Wabash Riverbanks

The Wabash Riverbanks in Indiana offer rich hunting grounds for artifact collectors. Ancient Native Americans used this major waterway for transportation and fishing, dropping countless tools and weapons over generations.

The Miami, Delaware, and Potawatomi tribes frequently camped along these banks, leaving behind artifacts dating back thousands of years.

The river’s constant erosion and seasonal flooding regularly uncover new pieces, particularly in areas where the banks curve or form natural pools. Search areas with gravel deposits and exposed clay banks to find arrowheads.

Early morning searches with low-angle sunlight make it easier to spot the distinct shapes and materials of worked stone. The dark chert used by local tribes stands out against the lighter riverbank soil.

Fall Creek

Fall Creek’s winding path through central Indiana creates perfect conditions for finding Native American artifacts. The creek’s recurring floods over thousands of years exposed and buried countless arrowheads, especially around natural bends and ancient campsites.

The Shawnee people used this waterway extensively for hunting and fishing, leaving behind a rich collection of points and tools.

The creek’s gradual erosion of limestone and shale banks continues to reveal new artifacts, particularly after heavy rains. Many collectors have success searching the gravel bars that form on the creek’s inside bends during low water periods.

Spring is the best time to search when vegetation is minimal and recent floods have shifted the creek bed. The most common finds include Fort Ancient and Middle Woodland period points made from local chert.

Hamilton Area

Hamilton, Indiana offers exceptional arrowhead hunting opportunities along the White River’s banks and in freshly plowed fields. This area was a major crossroads for Native American travel and trade, particularly where Strawtown now sits.

The region’s rich soil and abundant water sources attracted various tribes including the Miami, Delaware, and Lenape peoples from 1700-1800s.

The glacial deposits left behind thousands of years ago created perfect conditions for preserving stone tools and points. After heavy rains, these artifacts often surface in erosion channels and creek beds.

The area around Noblesville has yielded numerous Archaic period points, while the Potter’s Bridge area is known for producing both points and tools.

Yellow River

The Yellow River’s shifting sandbars and eroding banks regularly expose ancient artifacts. This waterway, stretching through northern Indiana, served as a major transportation route for Native Americans for thousands of years.

The Miami and Potawatomi people frequently camped along its banks, particularly near present-day Plymouth and Knox.

The river’s shallow depth and clear waters make it ideal for spotting flint and chert pieces, which stand out against the sandy bottom. The best finds often occur where smaller creeks join the main river, as these junctions were popular fishing and hunting locations.

Early spring provides excellent visibility before vegetation grows thick. Focus on areas where the river has cut into older soil layers, and scan gravel bars that form on the inside of river bends.

LaGrange area

LaGrange area’s abundant lakes, rivers, and wetlands naturally drew Native Americans to settle in this region of northern Indiana. The county’s sandy soil conditions have helped preserve many stone tools and points for centuries.

The areas around Lake of the Woods and Ontario have yielded numerous points dating back to the Archaic period (8000-1000 BC). Walking field edges near water sources and checking eroded banks often produces results.

The region’s glacial history created natural stone deposits that Native Americans used for toolmaking. Many artifacts found here are made from local chert and flint.

The high concentration of wetland plants like cattails and water lilies also attracted game animals, making this area a prime hunting ground where points and tools were frequently lost or discarded.

More great places to find arrowheads and points

Here is the full list of great places to search: